Corona Vision Conversion Kit
Target's Corona Vision shadowless lighting system, which was dedicated to steel tip boards, can now be installed on your home soft tip dart board with this conversion kit.
No special tools are required. The four prongs on the bottom of the base/legs are inserted directly into your soft tip dart board while the magnets on the backside hold the Corona Vision Lighting System.
INSTRUCTIONS - HOW TO USE THE CONVERSION KIT
*No special Tools required
*Not to be used with a steel tip bristle dartboard.
Insert the four prongs on the bottom of the base/legs directly into the outer catch ring of your dartboard (metal side facing outward) between the following segments:
9 & 12
18 & 4
15 & 2
16 & 7
Attach your Target Corona Vision Light to the 4 conversion pieces by placing the feet of the Corona Light over them so the magnetic strips touch.
Plug in your Corona Light into the nearest power source and you're ready to play!
COMPATIBLE WITH THESE DARTBOARDS:
Gran Darts Gran Board Versions 1, 2, 3 and 3S
Gran Darts Gran Dash
Dartslive 100S & 200S
NOT COMPATIBLE WITH THE FOLLOWING:
Target Nexus
Arachnid Cricket Pro 900
Gran Darts Gran 132 (13.2 inch Practice Board)
